CZ-8002 Servo Control Tensile Strength Machine

General Information 

This machine incorporates high-precision load cells and is provided with high-precision measurement & control instruments with LCD. 

This machine is capable of calculating test parameters such as maximum force, yield strength, average peeling force and maximum deformation. 

This machine is applicable to tensile test of rubber, plastic, waterproof material, electric wire & cable, textile fabrics, netting rope, non-woven fabrics and other nonmetallic materials, metal wire, foil, plate and rod. 

Kind of test using the equipment: 

- Tensile strength & Elongation test. (IEC 60811-1-1, SNI 04-6190.1.1) 

Features 

- Load cell: Basic configuration: a piece of tension and compression sensor
  (maximum load).

- Test bench lifting device: High/low velocity controllable automatically; jogs control
  available.

- Test bench returning function: Manual or automatic return; automatic return upon
  fracture.

- Overload protection: Automatic protection of the machine would be activated when
  the load applied is 10% more than maximum load. 

Technical Specifications 

- Maximum load: 10, 20, 50, 100, 200, 500 Kgf 

- Accuracy class: 0.5 

- Report unit switchover: N KN Kgf Lbf Kpa Mpa Kgf/mm² 

- Effective force measurement range: 0.25%~100% 

- Force measurement accuracy: Less than 1% of indicating value. 

- Tester resolution: Maximum load – 250000 weights. 

- Effective test width: 130 mm 

- Effective room of tension: 650 mm 

- Range of test velocity: 0.001~500 mm/min 

- Velocity accuracy: Class 1: .1~500 mm/min 

- Displacement measurement accuracy: Less than 0.5% of indicating value. 

- Deformation measurement system: 

- Extended configuration: gross deformation: 10mm~200 mm 

- Gauge length adjustable; deformation of 600 mm 

- Deformation measurement accuracy: Less than 1% of indicating value 

- Dimensions of host: 585 x 505 x 1490 mm (WxDxH) 

- Weight of host: 120 kg