Ozone Aging Test Machine

General Information 

This series of chamber by the ozone generator to produce high concentrations of ozone can be used for non-metallic materials, organic materials (paint, rubber, plastics, paints, pigments, etc.) in the conditions of ozone aging test. Can also be used to check the sample tolerated some corrosion. 

Ozone is a major factor in rubber cracking although it is rare in the atmosphere, ozone aging tank simulates and enhance the condition of ozone in the atmosphere to study the effects of ozone on rubber, and then identify and evaluate the method to resist ozone and aging for rubber, adopt effective anti-aging measures to enhance the life of rubber products. 

Kind of test using the equipment: 

- Ozone aging test. (IEC 60811-2-1, SNI 04-6190.2.1) 

Features 

- Sensor: Ozone concentration sensor capable for accurate control. 

- Speed electric machine drive sample frame configuration. 

- Ozone concentration auto digital display controlling instrument. 

- Digital display measurement on line automatically. 

- Measurement adjustment interface. 

- Ozone concentration/temperature and humidity set value controlling PID
  auto setting.

Technical Specifications 
- Ozone concentration: 10 ~1000 pp hm 
- Ozone concentration déviation:  ≤5% 
- Temperature: +10℃ ~ 60℃ 
- Temperature fluctuation: ±0.5 ℃ 

- Uniformity: ±2 ℃ 

- Relative humidity: 60% RH above 

- Rotating speed of sample rack: 360 rotatory sample rack (1r/min). 

- Ozone source: ozone generator (voltage-silent discharge tube) 

- Inside air velocity: over 2 feet / sec 

- Degree of ozone concentration fluctuation: 10% 

- Inside dimension: 500×500×600 mm (L × W × H) 

- Air flow rate: 20~80 L/min
- Power: 220V, 50/60Hz