General Information
This equipment uses the best simulation sun UV spectra of fluorescent UV lamps and the combination of temperature control, for the wet device to simulate the material causing discoloration, brightness, strength reduction; cracking, flaking, powder, oxidation and other damage to the sun (UV) high temperature, high humidity, dew, dark cycle etc, at the same time by ultraviolet light and moisture of synergy between the single material or single capacity of water logging resistance light fastness ability abate or failure, which is widely used in the material resistant to climate performance evaluation.
This equipment uses the best simulation sun UV spectra of fluorescent UV lamps and the combination of temperature control, for the wet device to simulate the material causing discoloration, brightness, strength reduction; cracking, flaking, powder, oxidation and other damage to the sun (UV) high temperature, high humidity, dew, dark cycle etc, at the same time by ultraviolet light and moisture of synergy between the single material or single capacity of water logging resistance light fastness ability abate or failure, which is widely used in the material resistant to climate performance evaluation.
This equipment can simulate the prime UV level of shining to make fluorescent lamp, combined with temperature control, humidity system, assume material discolored, shining strength lowed, broken, peeling, powdered, oxidized in UV level, high temperature, high humidity, fog, darkness or their cooperation, affect the materials single light & humidity resistance capability. This machine can provide good UV light, low price, easy operation, test itself by programme, automatic testing, stable light strength, high recurrent of same test result.
Kind of test using the equipment:
- UV test for photovoltaic (PV) modules. (IEC 61345)
Features
- Controller: touch-screen
- Show UV strength and value, RS-485 connector
- Temperature Sensor: PT100 temperature sensor
- Temperature & humidity control by: BTHC
Technical Specifications
- Temperature range: RT+10℃ ~ 70℃
- Temperature uniformity: ≤2°C
- Degree of temperature fluctuation: ≤±0.5°C
- Humidity range: RH ≥90％
- Environmental temperature: RT+15°C~35°C
- Environmental humidity: ≤85% RH
- Lamp center distance: 70±2 mm
- Center distance between specimen and lamp: 50±2 mm
- Lamp model: UV-A, 40W, AC 220 V / UV-B, 40 W, AC 220 V.
- Wavelength: 315~400 nm / 280~315 nm
- Number of lamps: 8
- Equipment weight: ≥100 kg
- Internal dimension: 450 × 1100 × 500 mm (W×L×H).
- Illumination dimension: 450 × 260 mm (L × H)
- Power: AC 220V ± 10%; 50Hz; 3 kW
- Lamp’s service life: 1600 H
Kind of test using the equipment:
- UV test for photovoltaic (PV) modules. (IEC 61345)
Features
- Controller: touch-screen
- Show UV strength and value, RS-485 connector
- Temperature Sensor: PT100 temperature sensor
- Temperature & humidity control by: BTHC
Technical Specifications
- Temperature range: RT+10℃ ~ 70℃
- Temperature uniformity: ≤2°C
- Degree of temperature fluctuation: ≤±0.5°C
- Humidity range: RH ≥90％
- Environmental temperature: RT+15°C~35°C
- Environmental humidity: ≤85% RH
- Lamp center distance: 70±2 mm
- Center distance between specimen and lamp: 50±2 mm
- Lamp model: UV-A, 40W, AC 220 V / UV-B, 40 W, AC 220 V.
- Wavelength: 315~400 nm / 280~315 nm
- Number of lamps: 8
- Equipment weight: ≥100 kg
- Internal dimension: 450 × 1100 × 500 mm (W×L×H).
- Illumination dimension: 450 × 260 mm (L × H)
- Power: AC 220V ± 10%; 50Hz; 3 kW
- Lamp’s service life: 1600 H
